This document specifies the general quality requirements for “Sleeping Bag” and other similar products. It is used as a general guideline for inspection if clients have not defined their requirement.   

此文件為針對箱包及類似產品驗貨的通用標準。如果客戶沒有特別的要求，在此定為通用的驗貨指南

2. Inspection Criteria of Product / Package 產品/包裝驗貨標準 ²

Product: 產品

·Must be without any unsafe defect for using;   

不允許有在實際使用中任何對使用者造成傷害的缺陷；

·Should be free of damaged, broken, scratch, crackle etc. Cosmetic / Aesthetics defect;   

不應有任何損壞，破碎，擦傷，或碎裂等外觀缺陷；

·Must be conform to the shipping market legal regulation / client’s requirement;   

必須符合銷往國當?shù)氐姆ㄒ?guī)以及客戶的要求；

²

·The construction, appearance, cosmetics and material of all units should comply with   client’s requirement / approved samples;       

產品的結構，外觀，材料等必須符合客戶的要求或與樣品保持一致；

·All units should have full function complying with client’s requirement / approved   samples;   產品功能必須符合客戶的要求或與樣品保持一致；   

·The marking / label on unit should be legal and clear.     

產品上的標記/標簽必須符合法規要求且清晰明確。

Package: 包裝    ²

·All units will be adequately packaged, and constructed from suitably robust materials,   such that it arrives in store in a merchantable condition;       

產品要有足夠強度的材料構成的充分包裝，使得貨物以可銷售的狀態到達目的倉庫； ²

·The packaging material can protect the goods from damage during transportation;     

在運輸過程中，包裝材料能防止貨物受損；   ²

·The shipping mark, bar code, label (such as price label), should conform to client’s spec.   and/or approved samples;       

箱麥，條形碼，標簽（例如：價格標簽）應符合客戶的要求或與樣品保持一致； ²

·The package should comply to client’s requirement / approved samples;     

包裝必須符合客戶的要求或與樣品保持一致；   ²

·Text of illustration, instruction, label and warning statement etc. must be clearly printed   in user’s language;   

圖解，說明書，標簽，警告聲明等應清晰地印有使用者語言；   ²

·The illustration and instruction on the packaging must conform to the product and its   actual performance.   

包裝上的圖解和說明書必須與實際產品及其功能保持一致；   ²

·The method and material of pallet/crate etc. should be approved by client.           

棧板/板條箱包裝的材料及方式必須經客戶批準   

3.   Inspection Plan & Defects classification

檢驗計劃及缺陷分類      Ø   

Sampling procedure & Defects Definition, please refer to SHOP-HI001 General Inspection Operation Procedure   

抽樣程序以及缺陷定義，詳見SHOP-HI001 通用檢查程序 – 最終隨機檢查。      Ø

Acceptable Quality Limit:

可接受的質量限 ²

Critical 0 Non-conformity is not allowed ²

AQL 1.5 For Major Non-Conformity ²

AQL 4.0 For Minor Non-Conformity

                 .                                                                 Finger prints on mirror surface 鏡面指印    X   Dust attached on mirror surface 鏡面銹跡 (臟污纖維附在織物表面)   X X   Loose fibers attached on mirror surface 鏡面飛花 (松散纖維附在織物表面)    X     Appearance   Color shade variation between two parts 色差   X X   Color off tone 脫色   X   Creases mark 皺痕   X    Wrinkle mark 起皺    X